APAR#: | II10566 |
Component: | INFOAS400 - AS/400 Information |
Release(s) | R410 |
Abstract
NETWORK STATION MANAGER MAINTENANCE REFERENCE
Error Description
**Last updated 97/12/01 **
Removed info on browser PE'ed
PTFs.
G.
Breland
.......................................
**Last updated 97/11/26 **
Added info about PE status on browser
ptfs sf43589 & sf43590. G. Breland
.......................................
**Last updated 97/11/25 **
Group PTF list changed due to supercedes.
Added support for model 8362 (series 1000).
Added support of JVM 1.1.2. Added section
regarding the Series 1000 (model 8362).
Also added group ptf blurb about boot
monitor version 2.9+ . Added info about
browsers ptfs and rel 2.5 issues with
the browsers. G.
Breland
.......................................
**Last updated 97/10/31 ** Added
superced ptf information to the
NSM ptf list. GBreland
.......................................
** updated 97/09/19 ** Added
comment about 5733A07 product shows as
R370 on R410 AS/400. GBreland
.......................................
** updated 97/09/18 ** Added 2 PTFs
to the NSM group ptf list and removed
4 ptfs that are superceded. GBreland
.......................................
** updated 97/09/08 ** Added 3 PTFs
to the NSM ptf list. GBreland.
.......................................
** Updates prior to Sept97 are no
longer listed here... G. Breland
........................................
>>> ABOUT THIS INFORMATIONAL APAR
The IBM Network Station Manager license program you order
for AS/400 systems using Version 4 Release 1 is 5648-B07
(which is the same program you order for AS/400 systems
using Version 3 Release 7). This product installs &
runs on both Version 3 Release 7 and Version 4 Release 1.
Please note that all references to this product on the
AS/400 system and online information (including the
install command) will refer to the program as 5733-A07.
NOTE: On an R410 AS/400, the product 5733A07 (and/or
the browser products) will display as release level
R370 (when using the DSPSFWRSC command).
This informational APAR contains information specific for
the IBM Network Station Manager for AS/400 systems using
Version 4 Release 1. This informational APAR will be
updated on a regular basis and therefore we suggest you
order and read it on a regular basis.
----------------------------------------------------------
>>> RELATED INFORMATIONAL APARS AVAILABLE
For additional information, we strongly suggest you also
order Informational APAR II10405 (and its' continuation
apars: II10676 & II10938). II10405 is a General
Information apar, reporting tips and known problems
with Network Stations regardless of the AS/400 version.
II10405 also contains an INDEX of the other
AS/400 INFO APARs relating to IBM Network Stations.
Note: Info apar II10309 contains Version 3 Release 7
specific information which can be ignored when you
are using OS/400 Version 4 Release 1.
-----------------------------------------------------
>>> INITIAL PTFS REQUIRED
Before using the IBM Network Station Manager on your
AS/400 system at Version 4 Release 1, you must
install the latest OS/400 Cumulative PTF package onto the
AS/400 system.
NOTE: If your AS/400 was previously at Version 3 Release 7
and you were using the
IBM Network Station Manager,
the special
instructions in PTF 5769SS1-SF41493
pertain to your system
setup.
--------------------------------------------
>>> GROUP PTF FOR NSM (MANAGER)
The list of PTFs documented here contains the most current
set of PTFs available for the IBM Network Station Manager
for AS/400 systems at OS/400 Version 4 Release 1.
We strongly suggest you obtain and apply the complete set
of 5733A07 PTFs documented here so your AS/400 system is
at the latest level.
For your convenience, we have made a Group PTF for
the IBM Network Station Manager PTFs. You can
simply order the single PTF 5733A07-SF99081 and
all of the PTFs included in the group (which is the
entire set described in the list below) will be ordered.
Note that SF99081 may only be requested through ECS,
and the PTFs in the list will be delivered on media (CD).
If you prefer to obtain the PTFs electronically, you may
order each PTF in the list individually rather than
ordering SF99081.
When ordering the Group or individual PTFs, you will
need to specify the product as 5733A07 and the version
as V3R7M0 (because 5733A07 is a Version 3 Release 7
product that can be used on Version 4 Release 1).
NOTE: Applying the latest OS/400 Cumulative
PTF package will not necessarily result
in a complete set of the latest Network Station
PTFs; customers are advised to obtain the most
recent group PTF SF99081 in order to obtain
the latest Network Station code levels.
Product 5733A07
PTF Numbers included in Group PTF SF99081
-----------------------------------------
SF40228
SF40964
SF41351
SF41458
SF41459
SF41480
SF41535
SF41570
SF41674
SF41948
SF42091
SF42363
SF42784
SF42814
SF42958
SF43217
SF43240
SF43413
SF43430
SF43433
SF43437
SF43449
SF43451
SF43462
SF43477
SF43512
SF44343
***NOTES:
1. These PTFs can all be applied IMMEDIATE.
2. After the PTF has been applied, each IBM
Network
Station using the AS/400
system as its server must
be restarted (power off and
then power on).
3. The PTF SF43413 contains the 2.9.0 and
2.9.2 boot monitor images.
The special
instructions in the PTF cover
letter
contains the steps you
should follow in
order to update IBM Network
Stations to
the desired boot monitor
image. Information
concerning the changes to the
boot monitor
image can also be found in
the General Info
apar: II10405 (and/or its'
continuation apars).
----------------------------------------------------------
>>> BROWSER PTFS FOR REL 2.5
For your convenience this section provides a list
of PTFs available for the browsers supported on
the IBM Network Station:
IBM Browser 40bit, product: 5648B08
SF43058
* SF43589
IBM Browser 128bit, product: 5648B18
SF43289
* SF43590
Navio Browser 40bit, product: 5648B10
No PTFs at this time
Navio Browser 128bit, product: 5648B20
No PTFs at this time
* IMPORTANT INFORMATION:
As of 11/24/97, if the customer applies the Group PTF
SF99081 (R370 and R410 only), and has the IBM Browser
installed, then the customer must also apply the PTFs
shown above with an asterisk.
NOTE: It is not necessary to apply the PTFs SF43589 and
SF43590 to an AS/400 using OS/400 Version 3 Release 2.
But if these PTFs are applied or removed on an AS/400
running OS/400 R320 then an informational error message,
and a message CPF3569 will display. These error messages
can be ignored when encountered on a R320 AS/400 for
these PTFs.
-------------------------------------------------------
>>> SERIES 1000 (Model 8362) NetworkStation
As of 11/21/97, the Group PTF SF99081 provides support
for the IBM Network Station Series 1000; this is type
8362. Additional info about the suppor for the Series
1000 Network Station can be found in the General info
apar: II10405 (and/or its' continuation apars).
------------------------------------------------
>>> JAVA VIRTUAL MACHINE 1.1.2
As of 11/21/97, the Group PTF SF99081 provides support
for the Java Virtual Machine (JVM) version 1.1.2
Additional info about the support for JVM 1.1.2 can be
found in the General Info apar: II10405 (and/or its'
continuation apars).
-------------------------------------------------
>>> BROWSER SUPPORT
The PTFs provided in the Group PTF 5733A07-SF99081
includes all of the enablement support for the Navio
Browser (License Programs 5648-B10 and 5648-B20).
Therefore, be sure to apply these PTFs if you plan on using
the Navio Browser on your IBM Network Stations.
To support the Navio Browser, changes to the Network
Station Manager configuration files are performed by
some of these PTFs. Therefore, once this set of PTFs
is on your system you should not remove them unless
you have a plan to reinstall them (or the most current
set of PTFs at the time.)
NOTE: Additional information concerning both
the Navio Browser and the IBM Network Station
Browser can be found in the General Informational
APAR: II10405 (and/or its' continuation apars).
----------------------------------------------
>>> THE NSM (AMANAGER) "BROWSE..." OPTION
When using the IBM Network Station Manager to customize
user configurations, you need to change the authority
to QYTCMCLS in library QYTC in order for the Browse...
option to work correctly. Follow the steps provided
here at your AS/400 command prompt:
1. EDTOBJAUT OBJ(QYTC/QYTCMCLS) OBJTYPE(*PGM)
2. Press F6 to Add new users
3. Specify QTMHHTP1 and *USE as the user and
object authority respectively.
4. Press ENTER
5. Press ENTER
----------------------------------------------------
Local Fix (internal use)
Problem Summary
Problem Conclusion
Temporary Fix
Comments
Information APAR
Circumvention
REPINNED RP97/12/01
Removed info on browser PE'ed
PTFs.
G.
Breland
PTFs Available
Affected Modules
Affected Publications
Summary Information
Status................. CLOSED
CAN
Severity............... 4
HIPER.................. No
PIN.................... Yes
Reported Component..... INFOAS400
Fixed Component........
Failing Module.........
Reported Release....... R410
Reported Release PTF...
Latest Release PTF.....
FESN................... 5NFO000
Duplicate Of...........
Security Integrity.....
IBM disclaims all warranties,
whether express or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a
particular purpose. By furnishing this document, IBM grants no
licenses to any related patents or copyrights. Copyright (c)
1994, 1995, 1996 IBM Corporation. Any trademarks and product or
brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete
trademark information.