Abstract
NETWORK STATION MANAGER MAINTENANCE REFERENCE


Error Description

**Last updated 97/12/01 **
Removed info cencerning browser
PE'ed PTFs        G. Breland
.......................................
**Last updated 97/11/26 **
Added info about PE status on browser
ptfs sf43589 & sf43590.   G. Breland
.......................................
**Last updated 97/11/25 **
Group PTF list changed due to supercedes.
Added support for model 8362 (series 1000).
Added support of JVM 1.1.2.  Added section
regarding the Series 1000 (model 8362).
Also added group ptf blurb about boot
monitor version 2.9+ .  Added info about
browsers ptfs and rel 2.5 issues with
the browsers.        G. Breland
.......................................
**Last updated 97/10/02 **
Added 3 ptfs to the group ptf list (and
removed 3 supercedes).      GBreland
.......................................
**Last updated 97/09/18 ** Added 2 PTFs
to the NSM group ptf list and removed
4 ptfs that are superceded.  GBreland
.......................................
**Last updated 97/09/08 **
Added 3 PTFs to NSM ptf list.  GBreland.
........................................
** Updates prior to Sept97 are no
longer listed here...   G. Breland
........................................
 
>>> ABOUT THIS INFORMATIONAL APAR
 
The IBM Network Station Manager license program you order
is 5648-B07.  However, please note that all references to this
product on the AS/400 system and online information (including
the installation command) will refer to the product as 5733-A07.
 
This informational APAR contains information specific for the
IBM Network Station Manager for AS/400 systems using
Version 3 Release 7. This informational APAR will be updated
on a regular basis and therefore we suggest you order and
read it on a regular basis.
-----------------------------------------------
 
>>> RELATED INFORMATIONAL APARS AVAILABLE
 
For additional information, we strongly suggest you also
order Informational APAR II10405 (and all of its'
continuation apars).  II10405 is a General
Information apar, reporting tips and known problems
with Network Stations regardless of the AS/400 version.
II10405 also contains an INDEX of the other
AS/400 INFO APARs relating to IBM Network Stations.
 
Note: Info apar II10566 contains Version 4 Release 1
specific information which can be ignored when you
are using OS/400 Version 3 Release 7.
 
--------------------------------------------------------
 
>>> INITIAL PTFS REQUIRED
 
Before installing the IBM Network Station Manager for AS/400,
you are required to apply the set of PTFs identified below.
 
    Product 5716999
    PTF Number
    ---------------
    MF16377
 
    Product 5716SS1
    PTF Number
    ---------------
    SF36775
    SF37228
    SF37307
    SF37417
    SF37740
    SF39351
    SF40506
    SF40771
    SF42086
    SF42088
    SF42356
    SF42432
    SF42477
 
    Product 5716TC1
    PTF Number
    ----------------
    SF41871
 
-----------------------------------------------------
 
>>> GROUP PTF FOR NSM (MANAGER)
 
The list of PTFs documented here contains the most current
set of PTFs available for the IBM Network Station Manager
(5733A07) for AS/400s at OS/400 Version 3 Release 7.
 
We strongly suggest you obtain and apply the complete
set of 5733A07 PTFs documented here so your AS/400
system is at the latest level.
 
For your convenience, we have made a Group PTF for
the IBM Network Station Manager PTFs.  This way you
can simply order the single PTF 5733A07-SF99081 and
all of the PTFs included in the group (which is the
entire set described in the list below) will be ordered.
 
Note that SF99081 may only be requested through ECS,
and the PTFs in the list will be delivered on media (CD).
If you prefer to obtain the PTFs electronically, you may
order each PTF in the list individually rather than
ordering SF99081.
 
NOTE:  Applying the latest OS/400 Cumulative
PTF package will not necessarily result
in a complete set of the latest Network Station
PTFs; customers are advised to obtain the most
recent group PTF SF99081 in order to obtain
the latest Network Station code levels.
 
    Product 5733A07
    PTF Numbers included in Group PTF SF99081
    -----------------------------------------
     SF40228
     SF40964
     SF41351
     SF41458
     SF41459
     SF41480
     SF41535
     SF41570
     SF41674
     SF41948
     SF42091
     SF42363
     SF42784
     SF42814
     SF42958
     SF43217
     SF43240
     SF43413
     SF43430
     SF43433
     SF43437
     SF43449
     SF43451
     SF43462
     SF43477
     SF43512
     SF44343
 
*** NOTES:
 
   1. These PTFs can all be applied IMMEDIATE.
 
   2. Most of the PTFs in this list contain common
      special instructions which relay the following:
 
      A. Before applying the PTF DELAYED on an AS/400 using
         Version 3 Release 7, verify PTF MF15335 (for
         license program 5716999) is currently applied.
 
      B. After the PTF has been applied, each IBM Network
         Station using the AS/400 system as its server must
         be restarted (power off and then power on).
 
   3. The PTF SF43413 contains the 2.9.0 and
      2.9.2 boot monitor images.  The special
      instructions in the PTF cover letter
      contains the steps you should follow in
      order to update IBM Network Stations to
      the desired boot monitor image. Information
      concerning the changes to the boot monitor
      image can also be found in the General Info
      Apar: II10405 (and/or its' continuation apars)
 
----------------------------------------------------------
 
>>> BROWSER PTFS FOR REL 2.5
 
For your convenience this section provides a list
of PTFs available for the browsers supported on
the IBM Network Station:
 
IBM Browser 40bit,  product: 5648B08
     SF43058
   * SF43589
 
IBM Browser 128bit,  product: 5648B18
     SF43289
   * SF43590
 
Navio Browser 40bit,  product: 5648B10
     No PTFs at this time
 
Navio Browser 128bit,  product: 5648B20
     No PTFs at this time
 
* IMPORTANT INFORMATION:
As of 11/24/97, if the customer applies the Group PTF
SF99081 (R370 and R410 only), and has the IBM Browser
installed, then the customer must also apply the PTFs
shown above with an asterisk.
NOTE:  It is not necessary to apply the PTFs SF43589 and
SF43590 to an AS/400 using OS/400 Version 3 Release 2.
But if these PTFs are applied or removed on an AS/400
running OS/400 R320 then an informational error message,
and a message CPF3569 will display.  These error messages
can be ignored when encountered on a R320 AS/400 for
these PTFs.
 
-----------------------------------------------
 
>>> SERIES 1000 (Model 8362) NetworkStation
 
As of 11/21/97, the Group PTF SF99081 provides support
for the IBM Network Station Series 1000; this is type
8362.  Additional information about the support for the
Series 1000 Network Station can be found in the General
Info Apar: II10405 (and/or its' continuation apars).
 
------------------------------------------------
 
>>> JAVA VIRTUAL MACHINE 1.1.2
 
As of 11/21/97, the Group PTF SF99081 provides support
for the Java Virtual Machine (JVM) version 1.1.2
More information about the support for JVM ver 1.1.2
can be found in the General Info Apar II10405 and/or
its' continuation apars).
 
-------------------------------------------------
 
>>> BROWSER SUPPORT
 
The PTFs provided in the Group PTF 5733A07-SF99081
includes all of the enablement support for the Navio
Browser (License Programs 5648-B10 and 5648-B20).
Therefore, be sure to apply these PTFs if you plan on using
the Navio Browser on your IBM Network Stations.
 
To support the Navio Browser, changes to the Network
Station Manager configuration files are performed by
some of these PTFs.  Therefore, once this set of PTFs
is on your system you should not remove them unless
you have a plan to reinstall them (or the most current
set of PTFs at the time.)
 
NOTE:  Additional information concerning both the
Navio Browser and the IBM Network Station Browser
can be found in the General Information APAR:
II10405 (and/or its' continuation apars).
 
----------------------------------------------------------
 
>>> THE NSM (MANAGER) "BROWSE..." OPTION
 
When using the IBM Network Station Manager to customize
user configurations, you need to change the authority
to QYTCMCLS in library QYTC in order for the Browse...
option to work correctly.  Follow the steps provided
here at your AS/400 command prompt:
   1.  EDTOBJAUT OBJ(QYTC/QYTCMCLS) OBJTYPE(*PGM)
   2.  Press F6 to Add new users
   3.  Specify QTMHHTP1 and *USE as the user and
       object authority respectively.
   4.  Press ENTER
   5.  Press ENTER
 
-------------------------------------------------------------

Local Fix (internal use)

 

Problem Summary

 

Problem Conclusion

 

Temporary Fix

 

Comments

INFORMATION APAR

Circumvention

REPINNED RP97/12/01
Removed info on browser PE'ed
PTFs.               G. Breland

PTFs Available

 

Affected Modules

 

Affected Publications

 


Summary Information
Status................. CLOSED  CAN
Severity............... 4
HIPER.................. No
PIN.................... Yes
Reported Component..... INFOAS400
Fixed Component........  
Failing Module.........  
Reported Release....... R370
Reported Release PTF...  
Latest Release PTF.....  
FESN................... 5NFO000
Duplicate Of...........  
Security Integrity.....



IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright (c) 1994, 1995, 1996 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.